

产品介绍:
Product Introduction:
此泵具有最佳的处理高黏物料的能力,主要用于聚合物和预聚合物的输送.JM-F系列熔体泵用于输送真空反应器中的中高粘度的介质,吸入口大法兰设计,在真空条件下能使高粘度介质顺利吸入。
JM-F series melt pump is mainly used in transporting polymer and prepolymer owing its ability of dealing with high viscosity material. JM - F series melt pump used for transmission of high viscosity medium, vacuum reactor inlet flange design, under the condition of vacuum with smooth inhalation of high viscosity medium.
可加工的材料
The material of processing can be used
聚丙烯 热熔粘合剂 纤维素 含氟聚合物 聚砜 聚酯 PC PUR PEEK HIPS ABS PE PP PVC PMMA SMA LLDPE PS PA PVA PVB TPEs HDPE PB PET SAN PIB 其他材料
PP, hot-melt adhesive, fibrin, fluoropolymer, polysulfone, polyester ,PC, PEEK, HIPS ,ABS, PE, PVC, PMMA, SMA, LLDPE, PS, PA, PVA, TPES, HEPE, PB ,PET ,SAN, PIB and other materials.
技术参数:
泵体 |
耐热碳钢 不锈钢 铬镍合金钢 CPM 高温工具钢 钛钽合金以及带涂层的泵体 |
齿轮 |
高温工具钢 渗氮钢 CPM 特种钢以及带涂层的齿轮。 |
齿形 |
直齿 斜齿 人字齿(用于出口压力脉动特别低的工况) |
滑动轴承 |
工具钢 银镍合金 铜铝合金 CPM 特种材料以及带涂层的轴承 |
轴封 |
螺旋密封 填料函密封 组合密封 |
加热系统 |
电加热 热媒加热 |
规格流量范围 |
0.5cc——12000cc |
Technical Parameter
Material for Melt Pump body: Carbon steel preventing hot, stainless steel, Nickel-Chrome, Alloy Steel, CMP , high temperature tool steel, titanium-tantalum alloy steel and pump body with coating.
Material for Gear: high temperature tool steel, nitriding steel, CPM, special steel and gear with coating.
Straight gear, inclined gear and herringbone gear(used in very low pressure pulsation of outlet port)
Sliding bearing: Tool steel, silver-nickel ,copper-aluminum alloy, CPM ,special material and bearing with coating.
shaft sealing: Helical seal, packing seal and assembly seal
heating system: Electrical heating and medium heating
model/Volume Range:0.5cc—12000cc
运行参数:
物料粘度:最高≤40000Pa.s
工作温度:最高≤500℃
出口压力:最大≤70Mpa
以上数值为最大允许值,在一些特定情况下可能达不到。
Processing parameter
material’s viscosity :highest≤4000 Pa.s
working temperature:highest ≤ 500℃
outlet pressure:highest≤70Mpa
The parameter is the highest permissible value, it can’t reach the highest in a particular situation.